THE EFFECT OF LIPOSOMES'' MEMBRANE COMPOSITION ON THE BINDING OF THE PHOTOSENSITIZERS HPD AND PHOTOFRIN II

Abstract— Photofrin II (PF-II) is the commercial name of the active photosensitizer which is used in photodynamic therapy of cancer. The effect of the composition of lipid membranes on the binding of PF-II was studied and compared to hematoporphyrin derivative (Hpd), which is a complex mixture of porphyrins and from which PF-II is separated. We find that increasing the content of cholesterol in the bilayer decreases the partitioning of PF-II into the bilayer, similar to what we have found earlier with Hpd. However, inserting DMPC or DPPC into the membrane, which was shown to decrease the binding of Hpd, causes the opposite trend with PF-H. A membrane fluidizer such as benzyl alcohol also has different effects on the membrane binding of Hpd and PF-II. The rate of binding of PF-II to a lipid membrane is about 10 times lower than that of Hpd. These results as well as I^- quenching of the fluorescence of the two porphyrins indicate that PF-II is immersed less homogeneously and deeper in the bilayer than Hpd. The unique additive-dependent binding of PF-II to lipid membranes calls for care in using Hpd as a model photosensitizer.     

A convenient oxazole C-2 protecting group: the synthesis of 4- and 5-substituted oxazoles via metalation of 2-triisopropylsilyloxazoles

[reaction: see text] Metalation of oxazoles at the 4 and 5 position was achieved after regioselective C-2 silyl protection. Removal of the protecting group was then accomplished under mild conditions allowing for a straightforward preparation of C-5 monosubstituted and C-4,5 disubstituted oxazoles. The first practical C-2 protecting group of oxazoles has been demonstrated.     

Effects of alkali metal halide salts on the hydrogen bond network of liquid water

Measurements of the oxygen K-edge X-ray absorption spectrum (XAS) of aqueous sodium halide solutions demonstrate that ions significantly perturb the electronic structure of adjacent water molecules. The addition of halide salts to water engenders an increase in the preedge intensity and a decrease in the postedge intensity of the XAS, analogous to those observed when increasing the temperature of pure water. The main-edge feature exhibits unique behavior and becomes more intense when salt is added. Density functional theory calculations of the XAS indicate that the observed red shift of the water transitions as a function of salt concentration arises from a strong, direct perturbation of the unoccupied molecular orbitals on water by anions, and does not require significant distortion of the hydrogen bond network beyond the first solvation shell. This contrasts the temperature-dependent spectral variations, which result primarily from intensity changes of specific transitions due to geometric rearrangement of the hydrogen bond network.     

Chemically modified "polar patch" mutants of subtilisin in peptide synthesis with remarkably broad substrate acceptance: designing combinatorial biocatalysts

A significant enhancement of the applicability of the serine protease subtilisin Bacillus lentus (SBL) in peptide synthesis was achieved by using the strategy of combined site-directed mutagenesis and chemical modification to create chemically modified mutant (CMM) enzymes. The introduction of polar and/or homochiral auxiliary substituents, such as X=oxazolidinones, alkylammonium groups, and carbohydrates at position 166 at the base of the primary specificity S(1) pocket created SBL CMMs S166C-S-X with strikingly broad structural substrate specificities. These CMMs are capable of catalyzing the coupling reactions of not only L-amino acid esters but also D-amino acid esters as acyl donors with glycinamide to give the corresponding dipeptides in good yields. These powerful enzymes are also applicable to the coupling of L-amino acid acyl donors with alpha-branched acyl acceptor, L-alaninamide. Typical increases in isolated yields of dipeptides of 60-80 % over SBL-WT (e.g. 0 % yield of Z-D-Glu-GlyNH(2) using SBL-WT-->74 % using S166C-S-(CH(2))(2) NMe(3) (+)) demonstrate the remarkable synthetic utility of this "polar patch" strategy. Such wide-ranging systems displaying broadened and therefore similarly high, balanced yields of products (e.g. 91 % Z-L-Ala-GlyNH(2) and 86 % yield of Z-D-Ala-GlyNH(2) using S166C-S-(3R,4S)-indenooxazolidinone) may now allow the use of biocatalysts in parallel library synthesis.     

Single-molecule fluorescence spectroscopy of TOTO on poly-AT and poly-GC DNA

Excited state lifetime and amplitude measurements were made on thiazole orange dimer (TOTO), a dimeric DNA-intercalating fluorophore, at single-molecule concentrations. As expected from previous study, the excited state lifetime of TOTO intercalated in DNA is dependent on the sequence of the double-stranded DNA, having values of 2.2 ns in poly-GC DNA and 1.8 ns in poly-AT DNA. The distribution of excited state lifetimes of single molecules of TOTO intercalated into oligonucleotides having varying proportions of poly-GC sequences relative to poly-AT sequences were analyzed as a function of the fraction of poly-GC. By using excited state lifetime distributions from the purely GC and purely AT oligonucleotides as a basis set, it was possible to estimate the GC content of oligonucleotides with intermediate GC composition to within a few percent error. This serves as a model for the analysis of equilibrium binding distributions in DNA using single-molecule methods.     

A dual-column HPLC method for the simultaneous determination of DHPG (9-[(1,3-dihydroxy-2-propoxy)methyl]guanine) and its mono and diesters in biological samples

A convenient method for the simultaneous determination of various DHPG species present in biological samples is presented. This method utilizes a cation exchange column (25 cm X 4.6 mm i.d.) coupled in series to a short reversed-phase column (5 cm X 4.6 mm i.d.). The mobile phase consists of methanol:0.005M ammonium phosphate buffer, pH 2.5. There is a large polarity difference between DHPG and its esters due to the non-polar side chain of the ester moiety. The simultaneous determination of the diesters, monoesters, and DHPG in these samples using only the cation exchange or the reversed-phase column is not possible without time-consuming gradient elution. In the reversed-phase mode alone, the esters are highly retained relative to DHPG, whereas the esters are only slightly retained on a cation exchange column and are insensitive to changes in pH and ionic strength of the mobile phase. However, a combination of these two columns provides interesting selectivity for these compounds and offers a unique way of controlling the retention times of these species relative to each other. The retention time of esters can be selectively altered (with respect to DHPG) by changing the composition of methanol in the mobile phase. In contrast, the retention time of DHPG is controlled by changing the buffer strength and pH of the mobile phase.     

The importance of ground-state vibronic mixing in molecular Raman scattering

We consider Albrecht's theory for Raman scattering of fundamentals in the far and pre-resonance regions. Destructive interferences inherent to the A and B terms augment the conventionally suppressed C term dramatically. Raman excitation profiles for the ν₁(a_1g) and ν₆(e_2g fundamentals in benzene can be well fitted with theoretical C-term profiles involving the ¹E_1u(π-π^*) state at 1800 A.     

Structural basis for recognition of bacterial cell wall teichoic acid by pseudo-symmetric SH3b-like repeats of a viral peptidoglycan hydrolase

Endolysins are bacteriophage-encoded peptidoglycan hydrolases targeting the cell wall of host bacteria via their cell wall-binding domains (CBDs). The molecular basis for selective recognition of surface carbohydrate ligands by CBDs remains elusive. Here, we describe, in atomic detail, the interaction between the Listeria phage endolysin domain CBD500 and its cell wall teichoic acid (WTA) ligands. We show that 3′O-acetylated GlcNAc residues integrated into the WTA polymer chain are the key epitope recognized by a CBD binding cavity located at the interface of tandem copies of beta-barrel, pseudo-symmetric SH3b-like repeats. This cavity consists of multiple aromatic residues making extensive interactions with two GlcNAc acetyl groups via hydrogen bonds and van der Waals contacts, while permitting the docking of the diastereomorphic ligands. Our multidisciplinary approach tackled an extremely challenging protein–glycopolymer complex and delineated a previously unknown recognition mechanism by which a phage endolysin specifically recognizes and targets WTA, suggesting an adaptable model for regulation of endolysin specificity.

Combining genetic, biochemical and computational approaches, we elucidated the molecular mechanisms underlying the recognition of Listeria wall teichoic acid by bacteriophage-encoded SH3b repeats.     

Rapid synthesis of pomalidomide-conjugates for the development of protein degrader libraries

Current methods for the preparation of heterobifunctional pomalidomide-conjugates rely on methods that are often low yielding and produce intractable byproducts. Herein we describe our strategy for the reliable and succinct preparation of pomalidomide-linkers which is essential to the formation of these conjugates. We present the preparation of 18 pomalidomide-linkers in high yield compared to current literature methods. Our findings show that secondary amines consistently afford greater yields than their primary counterparts, a trend that we were able to exploit in the synthesis of several new pomalidomide homo-dimers in enhanced yields compared to similar literature syntheses. This trend was further utilised to develop the first one-pot synthesis of JQ1-pomalidomide conjugates in yields up to 62%, providing a method that is suited to rapid preparation of conjugate libraries as is frequently required for the development of new protein degraders.

Current methods for the preparation of heterobifunctional pomalidomide-conjugates rely on methods that are often low yielding and produce intractable byproducts. Herein we describe our strategy for the succinct preparation of pomalidomide-linkers.